keshav memorial institute of technology

An Autonomous Institution - Accredited by NAAC with 'A' Grade
( Powered by GENESIS )

**Proud to announce its new campus under the KMIT crown KMIT-Off campus @ Adibatla, Hyderabad, with intakes CSE-180, CSE(AIML)-120, IT-30 and CS&IT-30. ** Orientation Program 2022 is scheduled to take place on 31 October 2022. The Induction Program, for the newly admitted First Year Students, will begin from 1 Nov 2022. **II B.TECH II SEMESTER REGULAR EXAMINATION (KR20) TIMETABLE is out, You can view Time-Table here ** B.TECH  II YR II SEM  & III YR II SEM SPECIAL SUPPLY EXAMINATIONS IN MAY-2022 FOR 2011 ADMITTED STUDENTS. You can view the NOTIFICATION here **KMIT is pleased to announce that it was classified as Promising by Atal Ranking of Institutions on Innovation Achievement (ARIIA). You can view the certificate here ** NBA has accredited CSE UG Program for 3 academic years 2021-22 to 2023-24. **B.Tech I year II Sem Sept/Oct 2021 Regular exam results are released. To check results Click Here  KMIT  is proud to announce it's third college Keshav Memorial Engineering college @NGIT campus Uppal, CSE - 180, CSE AIML - 120 (EAMCET code KMEC).

 **KMIT is proud to announce that Ms SreeLaya, an IT student of 2023 batch, bagged an international offer with Amazon, Dublin, for a pay package of 154,300 euros ( 1.2 cr rupees pa). We wish her all the best for her future **One Week Online Workshop on "Privacy and Cyber Security" from 31-01-2022 to 5-02-2022, in association with CSI. To know more click here  **KMIT  is proud to announce it's third college Keshav Memorial Engineering college @NGIT campus Uppal, CSE - 180, CSE AIML - 120 (EAMCET code KMEC) **Four project proposals by our students Nischal Singhi, Srinivas Yadav, Akash Konda, and P Sai Varshith were accepted by GSoC. Congratulations and best wishes to them. To know more

EIE Laboratories



Industrial Automation Lab

Industrial automation uses various control devices like PLC's/DCS to have control on various operations of an industry without significant intervention from humans and to provide automatic control performance. It provides an industrial environment for control and automation. The process parameters can be controlled and automated using Programmable Logic Controllers (PLC), Distributed Control System (DCS).Interfacing and monitoring the automated process is done through Human Machine Interface (HMI) and Supervisory Control and Data Acquisition (SCADA). Industrial Automation Lab helps the students to gain knowledge in real world experience of Industrial automation.



Analytical Instrumentation Lab

The aim is to establish this laboratory for practical training in the field of analytical instrumentation like flaw detection in the metallic pieces using ultrasonic flaw detector, sample analysis using gas chromatograph, flame photometer, atomic absorption spectro-photometer.



Control Systems Lab

Control Engineering Laboratory takes care of teaching at the graduate level in basics of control and instrumentation, modeling, simulation, and optimization, intelligent methods, applications in various processes.

This laboratory is equipped with process simulation kit with electronic logic controllers, relay logic controllers, level and temperature control with PID controller, electronic transmitter and PLC (programmable logic controller) trainer kit to carry out advanced experiments



Industrial Instrumentation Laboratory

Industrial Instrumentation lab is basically concerned with the calibration of various sensing devices and measurement of various non-electrical parameters such as temperature, torque, viscosity, PH and conductivity.



Process Control Lab

This laboratory was established to make students aware about basic fundamentals of practical process control. Various control viz. closed dc loop control, cascade control, ratio control, PLC control are simulated/practically implemented to give student a better understanding. 



Transducers & Measurements Lab

Transducer & Measurements Laboratory is equipped with modern measurement instrumentation equipment’s, which helps the students to study different mechanism of measurement of Temperature, pressure, density, humidity, displacement, force, speed, torque, stress etc.



Basic Electrical Engineering Lab

This laboratory is to impart the basic knowledge of various fundamentals of Electrical Engineering.